• Headers Only
Show header lines only.
• Files + Headers
Show files and all headers.
The only additional headers seen in Files + Headers are for products on disk which you
may have recently deleted.
• Headers in Use
Show headers which have automatic send requests configured.
This shows headers with automatic send requests for any output, not just the output
device currently selected.
You may want to set up your product output assignments based solely on product
headers. Select Headers Only to do this.
7.3.2 Product Output: Product List
The product list at the bottom of the Product Output menu lists each product name on a
header line, followed by the versions of the product that are currently on disk. Each version
is identified by the time the data were collected, which is the start time of the associated
task.
Site and Type
The Site field displays the ID of the radar site where data for the product was collected.
The Type field shows the type of the product, such as PPI or RHI.
You can right-click the fields to manage the files. See Flagging a Product (page 268).
Name
The product name for the configuration of this product type.
IRIS Product and Display User Guide M211319EN-H
264 RESTRICTED
To Next Page
Loading...