Vaisala IRIS - Archive Log Area; Figure 97 Archive Log Area

Apply
Select Apply to update the product list, based on your selection criteria.
Grab
If you have selected a product, select Grab to insert the product's site, type, product
name, task, and date information in the filter fields.
All Wild
Select All Wild to return all the fields to the wildcard character.
Wild Time
Select Wild Time to change only the hours, month, day, and year fields to the wildcard
character.
Select Commands to show operations you can perform on the files from the Filter menu:
• Retrieve marks all selected files for retrieval.
• Cancel unmarks all selected files.
Filter Menu Start List At
The Archive log listing can contain several hundred files. Use the Start List At option to start
the list at a selected file.
You can select a starting number from a menu or enter a number directly into the field. This
is convenient for tapes that are in chronological order.
8.2.2
Archive Log Area
File Site Type Task TimeProduct DateProduct-Specific-Parameters
d 1 HAI CAPPI Z_020_240 Z 2.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
d 1 HAI PPI Z_020_240 Z 2.0deg 240km 480 P PPIVOL 17:11:13 12 Jul 1997
d 1 HAI CAPPI Z_030_240 Z 3.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
r 1 HAI CAPPI V_020_240 V 2.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
r 1 HAI CAPPI V_030_240 V 3.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
d 1 HAI RHI Z_XXX_120 Z 90.0deg 120km 600 D RHI 16:10:13 12 Jul 1997
d 1 HAI RHI V_XXX_120 V 90.0deg 120km 600 D RHI 16:10:13 12 Jul 1997
1 HAI RAW AERIAL Z V W 240km One AERIAL 16:05:00 12 Jul 1997
Figure 97 Archive Log Area
The archive log area shows a list of files that are on the archive. This list is used for
specifying files for a retrieve operation or verifying the progress of a record operation.
For tapes, the order of the list is the same as the order of the files on the tape. Usually, they
are in chronological order.
IRIS Product and Display User Guide M211319EN-H
274 RESTRICTED