For optical disks, the files appear in the same order as in the Product Output menu.
Archive logs are maintained on disk as ASCII text files.
When a tape is mounted, IRIS checks to see if there is a corresponding tape log. If the tape is
a valid IRIS tape, the list is displayed.
In the case of optical disk, a new log is generated when a disk is mounted.
File
This column contains status information about the file. The first column displays the
sequential tape file number (1, 2, ... ) and the second column contains one the following
symbols:
• r
The file has been tagged for a retrieve operation.
• d
The file is on disk as well as on tape. Retrieve is not permitted.
• "blank"
The file is on tape only and has not been tagged for retrieve.
Right-click File to select one of the following options:
• Retrieve marks a file for retrieval.
• Cancel unmarks the file.
Site
Shows the ID of the radar site where data for the product was collected.
Type
Shows the type of the product, such as PPI or RHI.
Product
Shows the product name for the most recent generation of the product type.
Product-Specific-Parameters
Shows additional information about the product.
TASK
Shows the name of the associated task.
Time
Shows the date and time (local time) when data for the product was collected.
Chapter 8 – Performing Archive Operations
RESTRICTED 275
To Next Page
Loading...