8. To avoid collision of the wind barbs in height, you can specify Height Step km.
Type 0.0 to see all the data.
9. In some cases, the wind estimates are noisy because of weak signals or poor coverage.
If needed, use Std Dev Thresh % to threshold poor estimates so that they are not
displayed.
Specify a number between 0 (no thresholding) and 100 (everything thresholded away).
Typically a value of 80 is used.
10. To test your setting, select Apply.
The velocity point is displayed if the following is true:
Stan dardDeviation < − In
tℎresℎold
100
× 1.0 + Velocity/10.0
More information
‣
Producing VVP Product Output (page 99)
‣
VVP Output Options: Line Graphs (page 253)
‣
Color Scale Tool (page 210)
‣
WIND and FCAST Output Options (page 257)
6.17.6
VVP Output Options: Line Graphs
VVP products can be displayed in graphical format of VVP wind profile parameters against
height. 1, 2, or 3 graphs may be plotted side-by-side.
Chapter 6 – Quick Look Window
RESTRICTED 253
To Next Page
Loading...