6.5 QLW Live Action Tool: Product
Generation and Display
The Live Action tool allows you to configure, generate, and display many IRIS products. If
one of these products is on the display, the Live IRIS tool becomes active.
Select the tool to show a light version of the relevant product configuration menu.
Supported live action products include: BASE, CAPPI, PPI, SHEAR, SRI, TOPS, VIL, and
XSECT.
Example: Live Action Tool Example for CAPPI
Figure 77 Example
Live Action Tool for CAPPI
You can modify the product settings on the fly such as the cross-section line position or
CAPPI height, and see continuous live updates on the display, typically at more than 10
frames per second.
For example, the VIL layer top can be scanned to observe the VIL at various heights above
the freezing level.
You can scan the CAPPI hit scanned up and down to observe the vertical structure of the
precipitation echoes. The Live menu also shows the type of display (Z, T, V, W).
Since the Live Action tool regenerates the product, it is necessary to send RAW data to the
display so that the ingest files are available. Also, the display must be licensed for the Live
Action tool.
IRIS Product and Display User Guide M211319EN-H
208 RESTRICTED
To Next Page
Loading...