Plot Max
Configure here the maximum velocity shown on the plots.
More information
‣
VAD: Velocity Azimuth Display (page 92)
6.17.5 VVP Output Options: Time-Height
You can use the Time-Height Output Options to show a height against time cross-section of
VVP parameters with the specified color background and overlay plot.
The
VVP product shows vertical profiles of average Doppler wind properties over the radar
such as wind speed, wind direction and divergence. The Output Options menu lets you
choose to display wind data in one of the following ways:
• Choose Display_Style > Graphs to display a graph of VVP parameters against height at
a single time. You can select 1, 2, or 3 graphs.
• The WIND product plots the horizontal wind speed and direction.
For this product type, you can choose whether to display all wind measurements or
only those winds that deviate from the mean.
You can choose either wind barbs or wind strings to represent wind speed and
direction, and you can specify a coverage threshold percentage.
1. Check that VVP is the current product type.
Chapter 6 – Quick Look Window
RESTRICTED 251
To Next Page
Loading...