9.2 Tagging and Untagging Ingest Files
Deleting files may interfere with subsequent product generation. Be sure
that a file is not required for product generation before you delete it. The only
circumstance that may require manual deletion is when you need to make room when
restoring a RAW file from tape.
CAUTION!
1. Select one or more files from the list. There are several ways to make your selection:
• Left-click the mouse over an entry in the list to select it, or press CTRL+click to
select more than one entry in the list.
• Click and drag the mouse to select a group of entries in the list, or press CTRL, then
click and drag the mouse to select multiple groups of entries.
• Use the Filter menu to produce a list of the ingest files that you want to tag.
2. Choose Keep, Delete, or Un-Tag from one of the following menus:
• If you selected the entries with the mouse, position the mouse cursor over the ingest
file list and right-click the mouse.
• If you selected the entries from the Filter menu, select Commands.
The files are marked with a k for keeping, a d for deleting, or the tags are removed,
depending on the command you chose.
IRIS Product and Display User Guide M211319EN-H
286 RESTRICTED
To Next Page
Loading...