5.4 GAGE: Raingage Reports
The GAGE product stores reports from rain gage sensors for display and use in product
generation. These products are produced using an input pipe from data sent by a weather
station system.
Because GAGE products are not produced from radar data, they do not need to be
configured or scheduled.
Each GAGE product file contains reports from all the rain gages, locations, and hourly
precipitation amounts for one time interval. Usually the time interval is one hour, but it can
be, for example, 15 minutes.
The display shows a color-coded GAGEicon (user definable) of precipitation. Clicking on the
GAGE icon provides a time history of GAGE amounts for a selectable number of hours.
More information
‣
Hydromet Raingage Correction Overview (page 363)
‣
Product Parameters (page 23)
‣
RAIN1 Scheduling with GAGE Product (page 372)
Chapter 5 – Configuring and Scheduling Optional IRIS Products
RESTRICTED 165
To Next Page
Loading...