The list of Target points is the same as the list of Home points. These can only be saved or
deleted by the operator. See Cursor Tool (page 229).
Once you have set your target, the target information shows:
Range and Bearing
To target from the most recent track point. In the example, the target bears 118° and
19 km.
Time to (target)
The time to the closest approach of the track to the target.
Time at
The clock time of when the echo makes its closest approach.
Approach
The distance of closest approach as measured from the track line to the target.
6.14.1 Creating and Editing a Track
1. To start a new track:
a. Select an existing track Name or type a new name.
b. Select Delete All Points to start a fresh track.
The menu shows Last Point of 0 to indicate that all points have been removed and
the Action shows Add Point.
IRIS Product and Display User Guide M211319EN-H
234 RESTRICTED
To Next Page
Loading...