Operators can create "virtual overlay names." If you have operator privilege, enter your
password through the Quick Look Window main File tool. Once you have privilege in the
window:
1. Select the button next to the overlay name and select New.
2. Type the new name in the prompt.
3. Select the layers that you want.
4. To save your result, select Display Options Menu > File > Save.
When you save, the virtual overlay name is shared among all IRIS windows, printers, and so
on.
Apply Other Products, Cancel
After you make changes to the Display Options, the Apply Other Products applies the
changes.
Any changes that are applied aect only the window that you are in. You do not have to
worry about aecting other windows (and vice versa).
Apply Other Products applies the changes to all product types, again for your window only.
Cancel exits the menu without making any changes.
Press any button to apply your changes to the current product type for your window only.
6.9 Display Options Tool - Quick Look
Window
The Display Options tool allows you to select components of a display such as geographic
overlays, range rings, or drop shadows. Select the icon to display the tool.
Chapter 6 – Quick Look Window
RESTRICTED 219
To Next Page
Loading...