Vaisala IRIS - Figure 95 Archive Menu

This is a test
File Site Type Task TimeProduct
File Menus Drive Commands
wind Archive Menu TAPE1 DAT
Archive ID
Help
Type Product NameSite
TASK
From To
Day Mon Year
Files
100
CommandsApply Grab All Wild Wild Time
Start List at
Commands
Write
Status
Mount
On
1
Done
Idle @ 1
SIG_96_11_27_E1W
DateProducts-Specific-Parameters
d 1 HAI CAPPI Z_020_240 Z 2.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
d 1 HAI PPI Z_020_240 Z 2.0deg 240km 480 P PPIVOL 17:11:13 12 Jul 1997
d 1 HAI CAPPI Z_030_240 Z 3.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
r 1 HAI CAPPI V_020_240 V 2.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
r 1 HAI CAPPI V_030_240 V 3.0km 240km 480 P PPIVOL 17:11:13 12 Jul 1997
d 1 HAI RHI Z_XXX_120 Z 90.0deg 120km 600 D RHI 16:10:13 12 Jul 1997
d 1 HAI RHI V_XXX_120 V 90.0deg 120km 600 D RHI 16:10:13 12 Jul 1997
1 HAI RAW AERIAL Z V W 240km One AERIAL 16:05:00 12 Jul 1997
36 /36 Files 9.7M/9.7M Bytes
Figure 95 Archive Menu
Filter Menu
You can use the standard filter menu for selecting the products that appear in the
Archive Log area.
Archive Control Area
The middle of the menu provides commands to control archive operations such as
mount or record, and displays status information for the archive device functions.
Archive Log Area
The bottom of the menu shows what product files, if any, are recorded on the archive
that is currently mounted.
1. Make sure the archive device is configured in Setup > Archive.
2. In IRIS, select Menus > Archive Menu and, for example, do the following:
• Mount an IRIS tape or disk (archive media) and start the recording process.
• Retrieve product files and store them on the system disk.
3. All operations are directed to a selected archive device. To select an archive device
(tape or optical disk), select Archive > Drive.
IRIS Product and Display User Guide M211319EN-H
270 RESTRICTED