2. In Display, on the top of the menu, specify which sites are displayed.
Value Description
All Sites Show the schedule for all sites.
Master Show the Master Schedule, with one entry for each scheduled product.
If a product is scheduled to run at multiple sites, the entry shows the site that ran
most recently.
Site Group Show the products that are configured for all sites in the group.
The Site Group is a subset of sites that is defined in the Site Group field.
Single Sites Show the products configured for a single site (select the site name). Use this if
your system supports one site.
The adjacent text field shows how many products match the display selection.
3. In Add for, on the top of the menu, specify the sites for which the product is added.
Value
Description
All Sites Add the product for all sites.
Site Group Add the product for all sites defined by the Site Group.
Tag with * the members of the site group. If you have a single site system, make
your site the only member of the Site Group.
Single Sites Add the product only for that site. Use this if your system supports one site.
4. To edit the products configured in the product schedule, right-click the Product field
and select one of the following:
Value
Description
Add Add a product to the schedule.
The product is generated on an on-going basis when the task collects data, subject
to the Skip time.
Remove Remove the selected product from the list for the site that is displayed.
If the Master Schedule is displayed, then the product is removed for all sites.
Edit Opens the Product Configuration menu for the selected product.
Chapter 4 – Scheduling Products
RESTRICTED 115
To Next Page
Loading...