2. Select Radar Sites and use the radar site selection tool to load the sites that you want
to composite
The order of the sites is important. The highest priority (first on the list) site that is in
the composite (some may be missing) determines the "Data Time" that is associated
with the product.
It is also used for filling data in overlapped regions if you select the Priority
combining rule.
3. In Output Site ID, specify the site used to identify the composite.
This does not have to be an actual radar site. You can use a "Virtual Site" associated
with the projection or your network.
Sites are configured by your system manager in the Setup utility. See IRIS and RDA
Utilities Guide.
IRIS Product and Display User Guide M211319EN-H
134 RESTRICTED
To Next Page
Loading...