• Loop Mode
Images are displayed based on the Loop/Animation tool configuration and the Most
Recent button is checked so new images are being displayed as they arrive from IRIS.
(Red Background)
• Images are displayed based on the Loop/Animation tool configuration and the Most
Recent button is NOT checked so new images are not being displayed.
You can select User and Auto modes through Mode in the tools area.
Loop and Slide mode are selected automatically when a slide show or animation/loop
starts.
In practice, you rarely need to manually switch the display mode, since IRIS does it
automatically for you:
• When you first start to do something in the display, IRIS automatically switches from
Auto to User. IRIS does not interrupt you by sending images while you are using the
window.
• The QLW automatically switches to Auto mode after 5 minutes of inactivity.
Legend ON/OFF Button
Legend ON/OFF Button
The legend area, title bar and scroll bars may by toggled o by the Legend icon which is
located on the left side of the tool section. Right-click the mouse in the display window to
restore the legend or if you are using a touch screen double tap the upper left corner
(100 × 100 pixels) of the window.
Turning o the legend if you want to reduce the size of the windows so that you can fit more
windows on your screen.
The start-up location of each window and whether the legend is on/o is controlled in
Setup > Output.
With the legend turned o, you may want to enable the internal legend that shows a
legend right in the display window instead of as a side menu.
See Display Options Tool - IRIS Product Output (page 213).
Turning o the legend is useful for "tiling" the display windows such as for creating a
multi-panel slide show.
Setting Operator Password
Some functions in the Quick Look Window are for operators only , since they can aect
other Windows:
Chapter 6 – Quick Look Window
RESTRICTED 205
To Next Page
Loading...