Selecting the Product Type
When you first enter the Display Options tool the product type is inserted automatically in
this field.
To choose a dierent product type, select the button.
To apply changes to this product type or all product types, use the apply options on the
bottom of the window.
If you display a CAPPI and change the product type field shown above to, for example,
PPI, the changes are not applied are in the displayed product (the CAPPI) until you select
Apply All.
Adding Product Overlays
The Display Option Tool > Product Overlay section lets you combine dierent products.
Almost any kind of product can be overlaid on any other product.
In the example above, an interactive TRACK product has been overlaid on a PPI. Typical
applications for this are:
• WARN product overlays
• WIND or NDOP (multiple Doppler) wind barb overlays
• TRACK
• SLINE (shear line)
Chapter 6 – Quick Look Window
RESTRICTED 215
To Next Page
Loading...