2. Enter the number of slides in Number of slides in show.
This field determines the number of slides in a show (maximum 16).
IRIS inserts the specified number of blank rows in the slide list.
You must populate each slide with information about the product it will display.
3. For each slide select the slide number (or row) and do the following:
a. Specify the site, type, and product name.
Select from products on the disk.
If there is no product of the type that you want, for example, if it has not been made
yet, select the blank product name "––––––" and type the name you want. When the
product has been transferred to your disk, it is displayed in the slide show.
b. Specify the Time Lag.
Time Lag specifies the version of the product according to the following rules:
• 0 The current (most recent) version of the product.
• 1 The previous version of the product, that is, the second most recent.
• 2 Two products prior to the current version.
This enables the comparison of product versions. In a multi-window environment,
the newest version of a CAPPI product can be displayed alongside a CAPPI product
from the previous hour.
To make a single step time sequence, type the same product type, the name for
each slide, and specify 0, 1, 2, ... for the lags.
c. Specify the Dwell Time, that is, how long the slide is displayed on the screen, before
sequencing to the next slide.
In the example menu, each slide is displayed for 10 seconds.
Dwell Time defines how long a slide is on the screen as well as a precise clock
schedule of time slots for displaying the slides, that is:
• Slide 1 Displayed at Midnight 00:00:00
• Slide 2 Displayed at 00:00:00 plus the Slide One Dwell Time.
• Slide 3 Displayed at 00:00:00 plus the Slide 1 and Slide 2 Dwell Times
The schedule increments throughout the day.
Note that a slide show can start at any time, but the time slots are defined by the
above algorithm. This allows you to configure multi-window slide shows where the
images in dierent windows all change at the same time and in the proper
sequence.
d. Select Apply.
4. To clear incorrect slide information, select the slide number (or row) and then Clear.
5. Select Save.
6. To start the show, select Play slide show or select the slide show icon in the legend.
IRIS Product and Display User Guide M211319EN-H
228 RESTRICTED
To Next Page
Loading...