Rev. 5
8-4
SERVICE
▲WARNING: ALWAYS HAVE AN APPROPRIATE FIRE EXTINGUISHER READILY AVAILABLE.
EFORE PERFORMING ANY MAINTENANCE OR REPAIRS TURN THE MASTER
SWITCH
'OFF' AND DISCONNECT THE NEGATIVE (-) BATTERY CABLE FROM THE BATTERY.
AUTION
EPLACEMENT COMPONENTS
WIRE
TERMINALS
AND FUSES MUST BE OF
THE SAME TYPE AND RATING AS THE ORIGINAL PARTS.
There are no serviceable electrical components. Replace malfunctioning or failed
components. Electrical components that are omitted from the component list on page 8-
2 are not considered line maintenance.
SUPPLIES
♦
3/8
7/16
10 mm
♦ Battery charger
♦ Scouring pad or equivalent
♦ Wire terminal crimping tool
♦ Wire cutter
♦ Multi-meter
♦ Razor knife
♦ Screwdriver
#2 Phillips
#8 Phillips
♦ Needle nose pliers
♦ Fire extinguisher
♦ 4mm Allen wrench
♦
♦ Wire terminals:
Splice
Spade (male/female)
♦
See component list on page 8-2.
♦ Wire (gauge = original)
♦ Snap bushing (size = original)