Rev.4
17-3
SUBSTITUTE PARTS
The following parts are approved for substitution. Either the original part or substitute
part is acceptable for installation in the aircraft.
Brake System
F 271-N-04X02 Male Nylon Tee ā Van's FLF-00004 Male Nylon Tee ā MCMASTER-
CARR 5779K204 ā LEGRIS 3103 56 11
Avionics System
FN4MC-2 Nylon 1/4 Straight ā Van's FLF-00007 Elbow ā MCMASTER CARR
5779K151 ā LEGRIS 3109 56 11
SV-D1000 (T) ā SV-HDX1100
Oil System (Note: There was no 'original part' in this case.)
FUMOTO F107N 12mm-1.75 Quick Oil Drain Plug ā CCA-2450 Valve and CCA-2474
Extension ā SAF-AIR M12175 Valve and RM12175 Extension.
Torx Drive Screw
AN526C832-R8 Phillips Truss SS X 1/2 in ā Fastenal 0175181 Torx, Pan Head,
SS X 1/2 in (0175180, 3/8 in) NOTE: May be used in place of screws that hold all
interior panels.
Rivets
AN470AD rivets may be substituted for specified LP4 rivets.
AN426AD4 rivets may be substituted for specified CS4 rivets
Cherry Max CR series rivets may be substituted for any AN470AD rivet or LP4 rivet.
CCR rivets and solid AN426AD3 rivets, used for attaching nutplates, may be used
interchangeably. AN426AD3 rivets are preferred for strength wherever they can be
accommodated.