Rev. 4
6-3
SERVICE
Annual lubrication will maximize the longevity of the control system. Refer to the
service schedule checklist for the specific service frequency of the components.
See Supplement for service schedule checklist.
SUPPLIES
TOOLS EXPENDABLE
♦
♦ Socket:
11/32
3/8
7/16
3/4
11 mm
♦ Combination wrench:
3/8
7/16
♦ Screwdriver:
#2 Phillips
♦ 2 1/2x3/16 bolt, washer, and
nut
♦ Cable tension meter
♦ Spring clamps (3)
♦
♦
♦ Safety wire
♦
♦ Lock clips
♦ Stabilator cables
♦ Rudder cables
♦ Bearing #DW4K2X (Bellcrank)
♦ Rod ends:
Control Stick: M3414 / CM-4MS
Flap Handle: CM-4M
Flaperon: F3514M
Trim/Servo: MM-3
♦ Rudder pedal
GENERAL
STABILATOR PULLEY REPLACEMENT AND CABLE TENSION
ADJUSTMENT
3/8, 7/16 combo wrench
Needle nose pliers
Cable tension meter
Spring clamps (3) Stick,