Rev. 1
10-4
COMPONENTS
SERVICE
The heating system does not require regular maintenance. If the push / pull cable
operation is not smooth at the time of the annual condition inspection, lubricate the
moving parts. If the heated air temperature is noticeably cooler than previous uses, see
troubleshooting.
The pre-flight and annual condition inspections are necessary to ensure all of the
components remain in good condition.
No maintenance is required on either of the fresh-air vents. A damaged vent is
replaceable provided the fuselage skin is undamaged.
SUPPLIES
TOOLS REPLACEABLE
♦
♦ #30 drill bit
♦ Blind rivet tool
♦ Combination wrench:
1/4
♦ Screwdriver:
♦
Connector ( = to original)
♦ Tubing ( = to original)
♦ Vent door sub-assembly
♦ Vent brackets
♦
♦ Plastic tie wraps
♦