Rev. 8
1–11
EPLACEMENT PARTS MUST BE OF EQUIVALENT SIZE
TYPE AND
RATING AS THE ORIGINAL PARTS FROM THE MANUFACTURER.
Copper crush ring (for drain plug)
U-5:00X5 Tire (any aircraft grade 5:00X5, 4 or 6
ply tire is acceptable.
U 5:00X5-6IT (any aircraft grade 5:00X5-6 inner
tube is acceptable)
ATO/ATC ¼ “ blade style 1, 2, 3, 5, 7.5, 30 Amp
rating. All fuse values of 3 amp and higher are
required to have LED “blown fuse” indicators.
RECOMMENDATION OR EQUIVALENT
As specified in latest Rotax documentation
Dry lubricant (candle wax, etc.)
Aeroshell 22 or equivalent
Loctite 567 or equivalent
Anti-seize compound, High temp
Loctite Anti-Seize or equivalent
MIL-H-5606A or MIL- PRF-83282
RECOMMENDATION OR EQUIVALENT
1:1 Water/Ethylene Glycol (refer to Rotax
engine documentation)
Male & Female spade, splice, and ring
LP4-3 (unless otherwise specified)
PAINT, TOUCHUP PGRAY
Cardinal gray #3607-GR-230
Any protective primer suitable for use on
aluminum and/or steel as appropriate
Decorative touch-up paint
To Next Page
Loading...
Need help?
General
