4. You can now assign the IPAW6-10 device to a system user.
To assign the IPAW6-10 to a user:
1. Go to Users > Users and click the Edit button beside the user you want to assign the IPAW6-10
to.
2. On the Edit user settings page, click the Unknown Fob button.
A list of unassigned fobs is displayed.
3. Click the Add button to assign the IPAW6-10 to the user.
4. On the Edit user settings page click Save.
Delete a IPAW6-10 personal alarm button
To delete the IPAW6-10:
1. Go to Configuration > Hardware > Wireless > Transceiver list.
2. Click the Delete button beside the IPAW6-10 you want to delete.
17.9.1.4 IRCW6-11 remote control
The IRCW6-11 4-button Remote is a device that allows a user to remotely operate the SPC system.
The device supports ARM, STAY, and DISARM functionality, as well as the operation of defined
outputs and an SOS feature.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 216 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
