VAT 615 Series - Page 87

Installation, Operating & Maintenance Instructions
Series 615 DN 40 (I.D. 1½”), DeviceNet
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 CH@vatvalve.com www.vatvalve.com
603476EA
2013-07-25
87/102
Description
Required tool
Seal removal and valve cleaning
20. Unfasten both screws complete
Allen Wrench
3mm
21. Remove mechanical unit from valve body
22. Clean shaft
Clean room wipes
soaked with isopropyl
alcohol
Seal removal and valve
cleaning
23. Remove both o-rings
Soft tool