VC 15817 - Page 76

75
Advanced Digital Video Platform Hybrid-DVR User’s Guide
TAG name and Channel have to be defined to proceeding the copy.
9 : Choose search type between „EVENT‟ and „TIME‟. The time selection table
tagged „10‟ in the above picture is used for one of this two search type
 : select the search mode to „Time Search‟.
 Yellow colored cell indicates the currently selected hour and minute.
 Green colored cell means that there is the recording data by the continuous recording.
 Red colored cell means that there is the event recording data.
 Click or double-click on the cell in the minutes bar will start the playback from the selected
time.
 : Right click on the minute bar will show the pop-up
menu such as the left pictures.
 : Taking the „COPY START TIME‟ from the selected time cell and input it
into the „From‟ of COPY control panel.
 : Taking the „COPY END TIME‟ from the selected time cell and input it
into the „To‟ of COPY control panel.
 : Taking the time for „EVENT SEARCH start time‟.
Selection the second by clicking on the ‘second’ bar will move the second of playback video to the selected
second. This is only available during the playback on-going.
Each cells in the time selection table indicates whether the recording data exists or not for that time and channel.
 : Select the search mode to „EVENT Search‟.