EasyManua.ls Logo

vc999 K7 - Intended Use

vc999 K7
121 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vacuum Packaging Machine VC999 K7
Safety, warranty
Page 12/121 Art.-No. 592.016 2008-11-26
NOTICE
Before each intervention at pneumatic parts, ensure that the compressed air valves and cylin-
ders are depressurized.
Always check all the safety devices prior to each start-up.
Check the earth resistance at the electrical components after carrying out work at the ma-
chine
Always observe local and regional safety regulations (e.g. electricity provider). This also
applies to the regulations of professional organizations.
NOTICE
The owner is solely responsible for workplace safety and adherence to statutory regulations
regarding machine handling.
This operator manual is part of the machine. If it is lost or damaged, immediately order a replacement
copy via our Customer Service. Always state the type of machine and the machine number (according
to the data on the name plate).
2.3 Intended Use
The Vacuum Packaging Machine VC999 K7 is a technical appliance which should only be used for its
intended task. Use of the Vacuum Packaging Machine in accordance with its intended purpose consists
with provisions in vacuuming and sealing suitable products in sealable plastic bags.
Proper use in accordance with the intended purpose also includes compliance with all the instructions
and conditions for setting up, connection and the operation of the Vacuum Packaging Machine as speci-
fied by the manufacturer.
Suitable products
Suitable products for vacuum wrapping are goods which do not develop any explosive or toxic vapours
on introduction of a vacuum and which will not be damaged by the effect of the vacuum. Such products
may be from the foodstuffs sector (e.g. meat, sausage, etc.) or the non-food sector (medical equipment,
electrical or mechanical components, etc.).
The owner is responsible for the suitability, condition and characteristics of the products being pack-
aged. The machine manufacturer is not responsible for the content of the packages.
If in doubt, check the suitability of products with valueless samples or take advice from the Vacuum
Packaging Machine manufacturer.
Any use that deviates from the use in accordance without the written approval of the manufacturer is
deemed to be mis-use. The manufacturer cannot be held liable for any damage to the Vacuum Packag-
ing Machine or vacuum-packed products arising from this.

Table of Contents

Related product manuals