vc999 K7 - Edit Program; Delete Program

Vacuum Packaging Machine VC999 K7
Operation
2008-11-26 Art.-No. 592.016 Page 67/121
9.10.3 Edit program
If you want to edit an existing packaging program, proceed as follows:
1. Enter the password to unlock step 3.
2. Change the desired parameters in Masks 101/102: Parameter 1/2 and 2/2.
3. Press Save program
and enter a new or existing program name via the displayed keypad.
4. Press Load program
and then the displayed program name.
5. Answer the subsequent prompt with YES. The program is saved in the current program directory,
loaded and displayed on the screen.
9.10.4 Delete program
If you want to delete a packaging program, proceed as follows:
1. Enter the password to unlock step 3.
2. Press Delete program
.
3. Press the program to be deleted in the displayed list.
4. Answer the subsequent prompt with YES. The program is deleted from the current program direc-
tory.