Vacuum Packaging Machine VC999 K7
Description of the machine
2008-11-26 Art.-No. 592.016 Page 23/121
3.4.2 Filling plate
The filling plate can be fitted inside the top of the vacuum chamber lid. This reduces the area of vacuum
and also the vacuum generation process.
NOTICE
By incorporating the filling plate, the useful chamber height is reduced accordingly from the
original 250 mm to 150 mm. Make sure that the remaining chamber height is still greater than
the height of the product to be packed.
NOTICE
Self-made filling plates of material that is porous or otherwise unsuitable for vacuum generation
can result in unacceptable loss of quality in packaging or problems in the packaging cycle. Use
original filling plates only.
To Next Page
Loading...
