Vacuum Packaging Machine VC999 K7
Maintenance
Page 80/121 Art.-No. 592.016 2008-11-26
11 Maintenance
This chapter on maintenance, troubleshooting and repairs to the Vacuum Packaging Machine is
aimed at the "operator" and the "service engineer".
Work on electrical installations should only be carried out by specialist personnel who have been prop-
erly trained and authorized to do this.
WARNING
Risk of electric shock. Switch the machine off before maintenance work and make sure that the
machine cannot be switched on again inadvertently by means of the padlock on the mains
switch. Only carry out work on the power mains if you are trained and authorized to do this.
11.1 Servicing plan
Regular servicing in accordance with the servicing plan will ensure problem-free operation of the Vac-
uum Packaging Machine.
Servicing includes any work designed to maintain the Vacuum Packaging Machine in operation, i.e.
• Cleaning
• Inspection
• Servicing work
For cleaning and servicing work, it may be necessary to set the Vacuum Packaging Machine in a pre-
set status. This is what the service positions are for in Mask 52: Test function.
The servicing plans in the sections below describe the tasks and recommended intervals for these. The
column "Documentation" gives details of the location of the corresponding work documents.
To Next Page
Loading...
