Vacuum Packaging Machine VC999 K7
Operation
2008-11-26 Art.-No. 592.016 Page 59/121
Loading pause
The conveyor belt is stopped for loading.
Loading pause on
:
The operator determines the cycle start by
pressing the green start button in the loading
area (Fig. 3/1, pos. 7).
Loading pause off
:
In automatic operation only: After opening the
vacuum chamber the Vacuum Packaging
Machine automatically starts the next cycle
when the conveyor belt is switched on.
Pause before
closing
If after conveying a pause is to be made before the vacuum chamber closes,
this pause can be defined by a time value between 0 and 10.0 seconds.
Setting range: 0.0 – 10.0 s
Factory setting: 0.0 s
Select the lowest possible value. A pause before closing extends the packag-
ing cycle!
To Next Page
Loading...
