Ventec Life Systems V-Home - System Monitors

Monitors
VentecLife.com 101
System Monitors
V*Home monitors the following system parameters. To view these monitors, press the MY VOCSN button from the Menu
tab.
Monitor Range Description
Date
2016-01-01
to
2030-12-31
The Date monitor displays the congured date. Periodically check that the date setting is
correct. To update the set Date setting, see “Changing Device Settings” on page 78.
Sys. PM Due In
-99,999 to
10,000 hours
The Sys. PM Due In monitor displays the time remaining in hours until the next preventative
maintenance activities should be performed. A negative number indicates how many hours the
maintenance is past due. Resetting this monitor requires service-level access to the system.
Contact your local Ventec Life Systems representative for service.
System Usage
0 to 99,999
hours
The System Usage monitor displays the total duration of V*Home operation over its life.
Time
12:00 AM to
11:59 PM
The Time monitor displays the congured time. Periodically check that the time setting is
correct. To update the Time setting, see “Changing Device Settings” on page 78.