Ventec Life Systems V-Home - Configuring Permissions

Controls and Settings
VentecLife.com 77
Conguring Permissions
The Permissions feature allows clinicians to congure which V*Home controls are locked (cannot be changed) until the
device is unlocked using the Clinician Access Passcode.
Control permissions set to User and Clinician are congurable at all times; they can be changed by anyone interacting
with V*Home. When a control permission is set to Clinician Only, the control will remain locked until the Clinician Access
Passcode is entered.
NOTE: Locked control settings will display in the conguration screen in gray.
To change control permissions:
1 If not already unlocked, enter the Clinician Access mode by following the procedure in
“Entering the Clinician Access Passcode” on page 76.
2 Press the PERMISSIONS button on the Menu screen.
3 Select the appropriate tab and scroll to the control you want to lock
or unlock. Slide the toggle to switch between User and Clinician and
Clinician Only access to the selected control.
4 When Permissions conguration is complete, press the < EXIT tab
near the top of the screen.
PERMISSIONS
R
X
User and Clinician
Clinician Only