Ventec Life Systems V-Home - Navigating the V*Home Touchscreen

The Touchscreen
VentecLife.com 51
The Touchscreen
Use the V*Home touchscreen to congure and operate the device, as well as monitor the patient. This chapter provides
an overview of the information and controls available on each of the four main tabbed navigation screens.
NOTE: If V*Home controls become difcult to select, use the Calibrate Touchscreen control to recalibrate the
touchscreen sensor. See “Available Device Settings” on page 79.
Locking the Touchscreen
To lock the V*Home touchscreen and protect against accidental button
presses, press and hold the lock screen button in the status bar for three
seconds. The icon will change to indicate the screen is locked, and a pop-
up message will appear when the screen is touched.
To unlock the touchscreen, press and hold the lock screen icon in the
status bar for 3 seconds again.
Quick View
The Quick View menu provides streamlined access
to commonly used V*Home therapies and features.
Use the smalll arrow near the manometer to expand
the Quick View menu and select from up to four
actions.
LOCKEDUNLOCKED