Setup
VentecLife.com 35
Connecting a React DataLink™
The optional React DataLink enables wireless access to V*Home data. The data can be accessed on the Multi-View
Connect™ portal at multiviewconnect.venteclife.com. Consult the React DataLink and Multi-View Connect IFU for
detailed instructions on device function and connection.
Note: Velcro strips must not obscure the label on the back of V*Home.
Note: Only V*Home software versions 5.00.09 or newer are compatible with the React DataLink.
Note: Make sure to adjust the V*Home Date and Time settings to your local date and time. Refer to the Device Settings
section for instructions on how to complete this action.
To Next Page
Loading...
