Ventec Life Systems V-Home - V*Home Monitor Screen Customization

Monitors
VentecLife.com 98
Monitor Screen Customization
Press the CUSTOMIZATION button from the Monitors tab to choose which monitors and
control settings display on each page of the V*Home Monitor screen. The rst page shows
a customizable set of nine monitors. The second page shows a customizable set of nine
control, alarm, and oxygen settings.
NOTE: The monitors selected for the top row of the Monitors tab will display on both the
Monitors and the Home tab.
To customize the Monitors screen:
1 Press the CUSTOMIZATION button on the
Monitors tab, and then press the monitor (or
control setting) you want to modify.
2 Press EDIT > on the right side of the screen.
3 Press the name of the monitor you want to
appear in the highlighted screen location.
4 Press ACCEPT to conrm your selection.
5 Press another monitor and repeat the steps
above to make additional changes, or press the
< EXIT tab near the top of the screen to exit
the customization screen.
0 5 10 15 20 25 30L H
MONITORS
CUSTOMIZATION
EXIT
EDIT
13.5cmH2O
10.0cmH2O
4.0cmH2O
PIP
MAP
PEEP
BREATH RATE
I:E RATIO
FiO2
15BPM
1:3
40%
430mL
0L/min
6.5L/min
TIDAL VOLUME
LEAK
MINUTE VOLUME
1
2
No Alarms
PRESSURE (cmH20)
SIMV-VOL
V
CUSTOMIZATION
TIDAL VOLUME
LEAK
MINUTE VOLUME
430mL
0L/min
6.5L/min
BREATH RATE
I:E RATIO
FiO2
15BPM
1:3
40%
0 5 10 15 20 25 30L H
MONITORS
CUSTOMIZATION
EXIT
EDIT
13.5cmH2O
10.0cmH2O
4.0cmH2O
PIP
MAP
PEEP
ACCEPTCANCEL
PIP
MAP
PEEP
BREATH RATE
I:E RATIO
FiO2
TIDAL VOLUME
3
4
5
No Alarms
PRESSURE (cmH20)
SIMV-VOL
V