Ventec Life Systems V-Home - Ventec One-Circuit Component Connection Order

Setup
VentecLife.com 24
Ventec One-Circuit Component Connection Order
Item Name Required? Additional Information
VOCSN Bacterial
Filter
Required See “Connecting an External Bacterial Filter” on page 25 for instructions.
Humidier Optional May include a form of humidication (either an HME or humidier).
Ventec One-Circuit Required Use either a Passive, or Valveless Ventec One-Circuit. Ventec One-Circuits
may include a heated wire. (For Mouthpiece Patient Circuit instructions, see
“Mouthpiece Patient Circuit Setup” on page 30.)
Heat-Moisture
Exchanger (HME)
Optional May include a form of humidication (either an HME or humidier). See
“Connecting an HME (Heat-Moisture Exchanger)” on page 27 for instructions.
Patient interface Required Examples of a patient interface include a mask, trach, or ET tube. and Passive
Ventec One-Circuits include an exhalation valve and are intended for use
with non-vented masks, trach, or ET tubes. Valveless Ventec One-Circuits are
intended for use with vented masks, or nasal cannulas for High Flow therapy.
PATIENT
INTERFACE
(optional
heated wire)
HME
PATIENT
CIRCUIT
HUMIDIFIER
(choose one)
BACTERIAL
FILTER
or
or
V*HOME