Ventec Life Systems V-Home - V*Home Monitoring Parameters

Monitors
VentecLife.com 94
Monitors
V*Home monitors multiple parameters. View monitored V*Home Ventilation therapy data by pressing the Monitors tab.
Oxygen and Nebulizer therapy monitors are available by navigating to the relevant therapy screen.
NOTE: Monitored data depends on the set Circuit Type, Mode, and the number of breaths delivered. Monitors will
display “‑‑” if they are not available for the set Circuit Type or Mode. V*Home will display a spinning circle graphic while
it is calculating a monitored value.
From the Monitors tab, press the CUSTOMIZATION button to congure which monitors display on the screen. The three
monitors congured to display on the top row of the Monitors tab will appear on the Home screen.
Press the WAVEFORMS button to view real-time ow, volume, and pressure Ventilation therapy waveforms.
NOTE: When used with passive and valveless Ventec One‑Circuits, V*Home was designed for use with a humidier or
HME. All volumes and ows are expressed in BTPS unless stated otherwise.
0 5 10 15 20 25 30L H
CUSTOMIZATION
WAVEFORMS
Therapy MenuMonitors
Home
No Alarms
PRESSURE (cmH20)
13cmH2O
10.2cmH2O
4.1cmH2O
PIP
MAP
PEEP
BREATH RATE
I:E RATIO
FiO2
15BPM
1:3
40%
TIDAL VOLUME
LEAK
MINUTE VOLUME
430mL
0L/min
6.5L/min
SIMV-VOL
V O
0 5 10 15 20 25 30L H
CUSTOMIZATION
WAVEFORMS
Therapy MenuMonitors
Home
No Alarms
PRESSURE (cmH20)
15.0cmH2O
10.0cmH2O
5.0cmH2O
PRESSURE CONTROL
PRESSURE SUPPORT
PEEP
BREATH RATE
INSPIRATORY TIME
FiO2
15BPM
1.0seconds
40%
RISE TIME
LEAK COMPENSATION
FLOW CYCLE
2
On
25%
CONTROL SETTINGS
SIMV-VOL
V