Alarms
VentecLife.com 91
The Alarm Log
The V*Home Alarm Log lists all active alarms, and all other alarms activated since the last time
the log was cleared.
To view the V*Home Alarm Log at any time, press the alarm banner in the status bar, or:
1 Press the Menu tab.
2 Press the LOGS button.
3 If needed, press the Alarms tab.
4 Scroll down on the page to see additional alarms.
To clear the list of all but the active alarm conditions, press the CLEAR LIST button from the Alarm Log screen.
Information about the alarm will also be stored in the V*Home Event Log, which cannot be deleted.
The Mark Event Button
The Mark Event button appears in software versions 5.00 and later only. This button is
accessible from the Alarm Log screen, or the Quick Access menu, and provides a means to
create a marker in the device Event Log and Multi-View data.
When an interesting or noteworthy event occurs during therapy that you’d like to mark, press
this button. A pin will appear in your Multi-View data at that moment of time, so that therapy
information surrounding the event can be analyzed.
To Next Page
Loading...
