Ventec Life Systems V-Home - Oxygen Troubleshooting; Multi-View Troubleshooting; Patient Circuit Troubleshooting

Troubleshooting
VentecLife.com 150
Oxygen Troubleshooting
Problem Cause Solution
Patient desaturation O2 monitoring equipment is not
connected.
Ensure the O2 monitoring equipment is
connected to the patient.
Multi-View Troubleshooting
Problem Cause Solution
Export stalls while writing to USB drive USB drive is corrupt Use a new USB 2.0 drive formatted to
FAT32.
Patient Circuit Troubleshooting
Problem Cause Solution
Patient circuit performance Obstructions in the patient circuit
Ensure connected patient circuit
accessories (such as an HME or
humidier) are clean and not obstructed.
Circuit Type control is not set correctly
Ensure that the Circuit Type control
settings matches the circuit type
connected to V*Home, and run a Pre-Use
Test.