Cleaning and Maintenance
VentecLife.com 125
Cleaning and Maintenance
The organization responsible for the use and maintenance of V*Home should perform all adjustments, cleaning, and
disinfection of V*Home. Follow all instructions provided in this Clinical and Technical manual to prevent damage to
V*Home during cleaning and maintenance procedures.
NOTE: All V*Home single‑patient use components and Ventec One‑Circuits are not intended for cleaning, sterilization,
or re‑use. Replace V*Home single‑patient use components and Ventec One‑Circuits regularly, following your healthcare
institution’s protocol.
Cleaning V*Home
Before cleaning any part of V*Home, disconnect external power sources.
WARNING: Do not perform maintenance or service on V*Home while it is powered on or in use. Maintenance, or
service procedures performed during use may temporarily alter the performance of V*Home and result in patient harm.
WARNING: Do not touch the patient and parts inside the V*Home enclosure simultaneously. High ows of electricity
are present inside V*Home enclosure and may be an electrocution hazard.
WARNING: Do not use ozone or any other non-approved cleaning materials on any part of V*Home, or exceed its
recommended storage temperature or humidity ranges to disinfect it.
To Next Page
Loading...
