Notices
1. Based on SNMP V2, SNMP V3 adds user authentication and encryption strategies.
2. If the user type is selected as the " No authentication, no encryption" policy, the authentication Protocol and Privacy
Protocol drop-down box is grayed out and cannot be set.
3. At this stage, the encryption type only supports the DES encryption type.
4. The user needs to customize the authentication and encryption passwords of more than 8 characters, and the password must be
the same as the password set by the main unit of the SNMP agent data receiving end. Otherwise, the password cannot be
decrypted and received.
After completing the parameter settings, click the Add button to add the NMS;
To modify the NMS settings, select the NMS you want to modify, modify the settings, and then click the Modify button
to save the settings.
To delete the NMS, select the NMS you want to delete and click the Delete button to delete the NMS.
Figure 3-93 SNMP (v3) Set
4) Remote service
Click the Network Settings submenu under the System Options menu, then click the Remote Service button to
pop up the page as shown in the Figure 3-94.
Figure 3-94 Remote service settings
The remote service settings include Request RDU remote, Cancel RDU remote and Replace Host. At the same
time, the user can set the communication parameters of the remote service system.
⚫ Request RDU remote: used to establish remote hosting relationship
(1)Enter a customized customer name in the End-User text box;
(2)Select the Contact Person, when the contact is selected, the corresponding phone and email will be
displayed;
Notices
The remote service customer contact needs to be set in the System settings -> User management in advance, and a phone or
email must be provided, otherwise the hosting request cannot be made. For details on how to set it up, see User Management in
this section.
(3)Select the Frequency of Reporting: “Monthly” and “Quarter”;
To Next Page
Loading...