8
Visionix EyeRefract User Guide
8
Equipment and Installation
The EyeRefract package consists of three separate devices that interact over a dedicated local
network:
1. EyeRefract unit
2. mini screen that is built into the EyeRefract unit and functions as a near-vision target
3. Android tablet, on which software for working with the system is pre-installed, for use by
the practitioner
Remark:
Ther following devices could be connected to the EyeRefract device trough wireless
data network. They are not supplied with the EyeRefract device.
4. VX22 Chart Display – Trademark: Visionix – Legal Manufacturer: Luneau Technology
Operations – Class 1.
5. VX40 Autolensmeter - Trademark: Visionix – Legal Manufacturer: Luneau Technology
Operations – Class 1. .
Components of EyeRefract package and elements which can communicate with
it.
This guide describes the EyeRefract package, the EyeRefract unit and the two Android tablets
– along with the hardware required to set them up. It briefly explains how to set up these items
and incorporate them in the entire system, as well as how to work with the EyeRefract unit and
with the software.
The components of the system are supplied preconfigured to connect properly to the local
network and interact with one another. Nonetheless, when the system is supplied, a trained
technician is sent to the site in order to unpack and set up the system. As part of this process,
the technician performs a general test to ensure that all of the components are working
properly.
To Next Page
Loading...
