78
Visionix EyeRefract User Guide
78
Maintenance
This chapter explains how to clean the EyeRefract unit and how to perform routine
maintenance tasks.
6. 1 Cleaning the Unit
Important!
Before cleaning the unit, turn it off and unplug it from the electric outlet.
To clean the plastic surface of the EyeRefract unit, dampen a cloth with a commercial, non-
abrasive cleaner and gently wipe the top, bottom, and front surfaces.
CAUTION: Do not spray or pour any liquid directly on the device.
CAUTION: Do not use caustic or abrasive cleaners.
Lenspen
The lenspen is lens cleaning tool ,It comes with a retractable dust removal brush non-liquid
cleaning element. the lenspen need to be changed after every 500 uses.
Chin Rest
Regular cleaning of the chin rest with a soft cloth and alcohol is strongly recommended. Chin
rest paper coverings are supplied with the device. Use the paper to cover the chin rest before
each patient use.
Forehead Support
Regular cleaning of the forehead support with a soft cloth and alcohol is strongly
recommended. The forehead support is the only part of the machine that comes into contact
with the patient.
To Next Page
Loading...
