Visionix EyeRefract - Page 40

Visionix EyeRefract User Guide
35
Overview of the Software
No.
Description
1
Up arrow
Raises the head on this side so that it aligns better with the patient's eyes
Tap the arrow to move the head up one step, or press and hold to move the head
continuously until you release the button.
2
Left arrow
Moves the head on this side to the left so that it aligns better with the patient's
eyes
Tap the arrow to move the head left one step, or press and hold to move the
head continuously until you release the button.
3
Chin Rest Arrows
Tap the up or down arrows to raise or lower the chin rest, or press and hold
them to move it continuously until you release the button.
4
Chin Rest Slider
Slide up or down to raise or lower the chin rest, for fine tuning you can use the
arrows #3
5
Right arrow
Moves the head on this side to the right so that it aligns better with the patient's
eyes
Tap the arrow to move the head right one step, or press and hold to move the
head continuously until you release the button.
6
Eye labels
L: The patient's left eye
R: The patient's right eye
Tap the label to activate or deactivate measurement for the eye. When it is
deactivated, the other controls are not available on this side, and the eye is not
visible in the camera view (#7).