300004969171/B Page 47 of 148
Figure 19: Patient Information Dialog Box
NOTE: The Select Mode button is only available on Volcano system version 3.3 or
higher: 400-0100.01, 400-0100.07, and 400-0100.08.
Enter or edit the patient information using the keyboard, or, if the DICOM network
worklist is configured in Settings, select the patient from the worklist.
Press the TAB key to move forward from one field to another. To move backward, press
the SHIFT + TAB keys simultaneously.
Clear Form will remove all information from the screen.
New Case will remove all information from the screen and deletes any existing image
data for the open case. New Case should only be used to discard an existing case and
start a new case.
Once the patient information is entered correctly, click OK. The Home screen is
displayed after OK is selected.
To Next Page
Loading...