EasyManua.ls Logo

WACKER Group LTC 4 - Engine Oil

WACKER Group LTC 4
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance LTC Repair
wc_tx000427gb.fm 48
4.8 Engine Oil
See Graphic: wc_gr002479
Drain the oil while the engine is still warm.
Note: In the interests of environmental protection, place a plastic sheet
and a container under the machine to collect any liquid which drains
off. Dispose of this liquid in accordance with environmental protection
legislation.
4.8.1 Remove the oil drain plug.
4.8.2 Allow the oil to drain.
4.8.3 Install the oil drain plug.
4.8.4 Fill the engine crankcase through the oil filler opening, to the upper
mark on the dipstick. See Technical Data for oil quantity and type.
4.8.5 Install the oil filter cap.
wc_gr002479
Caterpillar
Lombardini

Table of Contents