5-36 BA 1001/1501/2001 us – Edition 3.3 * * 12001b540.fm
Maintenance
5.15 Maintenance plan 1001 – 1501 (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of the attachment
manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 500 o/h
Every 1000 o/h
once a year
Customer
Wacker Neuson
service center
Fluid and filter changes ( ):
Perform the following oil and filter changes (check oil levels after test run):
• Engine oil
1
●● ●
• Engine oil filter
2
●● ●
• Fuel filter
3
●● ●
• Air filter element if dirt indicator is at “Service”
●
• Coolant
●●
• Hydraulic oil filter insert
4
●● ●
• Hydraulic oil
5
●● ●
Inspection work ( ):
Check the following material. Refill if necessary:
• Engine oil
●●
• Engine coolant
●●
• Hydraulic oil
●●
Clean water ducts
6
●●
Check radiator for engine and hydraulic oil for dirt. Clean if necessary
●●
Check cooling systems, heating and hoses for leaks and pressure (visual check)
●●
Air filter (damage)
●●
Prefilter with water separator: drain water
●●
• Clean
●●
Check V-belt condition and tension
●●
Replace the V-belt
●●
Check the exhaust system for damage and condition
●●
Check valve clearance. Adjust if necessary
●●
Maintenance