BA 1001/1501/2001 us – Edition 3.3 * * 12001b540.fm 5-37
Maintenance
Clean and adjust the fuel injection pump
7
●●
Check and adjust the injection pressure of the injection nozzles, clean the injection needles/nozzles
●●
Check and adjust injection time
8
●●
Empty diesel fuel tank
9
●●
Check battery electrolyte. Add distilled water if necessary
●● ●
Check alternator, starter and electric connections, bearing play and function
●●
Check preheating system and electric connections
●●
Pressure check of primary pressure limiting valves
10
●● ●
Check tracks for cracks and cuts
●●
Check track tension. Retighten if necessary
●●
Check bearing play of tread rollers, track carrier rollers, front idlers
●●
Check piston rods for damage
●●
Check screws for tightness
11
●● ●
Check pin lock
●●
Check line fixtures
●●
Check indicator lights for correct function
●● ●
Couplings, dirt pile-up on hydraulic system dust caps if necessary
●●
Check insulating mats in engine compartment for damage/condition
●●
Check labels and Operator’s Manual for completeness and condition
●●
5.15 Maintenance plan 1001 – 1501 (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of the attachment
manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 500 o/h
Every 1000 o/h
once a year
Customer
Wacker Neuson
service center