5-38 BA 1001/1501/2001 us – Edition 3.3 * * 12001b540.fm
Maintenance
Functional check ( ):
Check the function of the following assemblies/components. Rectify if necessary:
• Lights, signaling system, acoustic warning system
11
●● ●
Leakage check ( ):
Check for tightness, leaks and chafing: pipes, flexible lines and threaded fittings of the following assemblies and components. Rectify if necessary:
• Visual check
●●
☞Engine, hydraulic system and hydraulic components
●●
☞Cooling circuit
●●
☞Traveling drive
●●
Lubrication service ( ):
Lubricate the machine according to the lubrication plan
●●
1. Drain engine oil the first time after 50 o/h, then every 250 o/h
2. Replace the engine oil filter the first time after 50 o/h, then every 250 o/h
3. Replace the fuel filter the first time after 50 o/h, then every 500 o/h
4. Replace the hydraulic oil filter insert the first time after 50 o/h, then every 500 o/h
5. Replace the hydraulic oil the first time after 500 o/h, then every 1000 o/h
6. Clean the water ducts every other 1000 o/h servicing
7. Clean and adjust the fuel injection pump every other 1000 o/h servicing
8. Check and adjust the fuel injection time every other 1000 o/h servicing
9. Empty the fuel tank every 250 o/h
10. First check after 50 o/h, then every 500 o/h
11. Check the first time after 50 o/h, then every 500 o/h
5.15 Maintenance plan 1001 – 1501 (overview)
Work description
For servicing and maintenance on the attachment, please refer to the operation and maintenance manual of the attachment
manufacturer as well.
Maintenance plan/operating hours (o/h)
Maintenance
(once a day)
Every 50 o/h
Every 500 o/h
Every 1000 o/h
once a year
Customer
Wacker Neuson
service center
To Next Page
Loading...
Need help?
General
