BA 357-00 * 3.0 * 35700_07_Wartung.fm 7-65
Maintenance 7
Checking/replacing fuses on the fuse panel
The fuses 17 are located under the cover A on the right in the control lever
console.
Fuse assignment: see label B on the side in the cabin.
1. Lower the loader unit.
2. Apply the parking brake.
3. Actuate the motor isolating switch.
4. Turn the machine off and remove the ignition key.
5. Remove the relevant cover A of the fuse panel.
6. Replace defective fuses by new ones.
➥ Descriptions and output indications
– see chapter 9 “Fuses” on page 9-11.
7. Check the electrical system for correct function.
To Next Page
Loading...