WAGNER PROTEC 95-150 - Default Chapter; Table of Contents

3
VERSION 01/2020
ORDER NUMBER DOC2340282
IceBreaker 150-300 cm
3
Table of Contents
1 ABOUT THESE INSTRUCTIONS 6
1.1 Preface 6
1.2 Warnings, Notices and Symbols in these Instructions 6
1.3 Languages 6
1.4 Service Manual 7
1.5 Continuous-ow heater operating manual 7
1.6 Abbreviations 7
1.7 Terminology for the Purpose of this Manual 7
2 CORRECT USE 8
2.1 Device Types 8
2.2 Type of Use 8
2.3 For Use in Potentially Explosive Areas 9
2.4 Processible Working Materials 9
3 IDENTIFICATION 10
3.1 Explosion Protection Identication 10
3.2 Identication "X" 10
3.3 Type plates 11
4 BASIC SAFETY INSTRUCTIONS 12
4.1 Safety Instructions for the Operator 12
4.1.1 Electrical Devices and Equipment 12
4.1.2 A Safe Work Environment 12
4.1.3 Personnel Qualications 13
4.2 Safety Instructions for the Personnel 14
4.2.1 Personal Safety Equipment 14
4.2.2 Safe Handling of WAGNER Spray Devices 14
4.2.3 Grounding the Device 15
4.2.4 Product hose 16
4.2.5 Cleaning and Flushing 16
4.2.6 Touching Hot Surfaces 18
4.2.7 Maintenance and Repair 18
4.2.8 Protective and Monitoring Equipment 18
5 DESCRIPTION 19
5.1 Components 19
5.2 Mode of Operation 20
5.2.1 Air motor 20
5.2.2 Fluid section 20
5.3 Protective and monitoring equipment 21
5.4 Scope of delivery 21
5.5 Data 21
5.5.1 Materials of Paint-wetted Parts 21
5.5.2 Recommended Packings 21
5.5.3 Technical Data for PROTEC 22
5.5.4 Dimensions and Connections for PROTEC 95-150 and 72-200 23
5.5.5 Dimensions and Connections for PROTEC 60-240 24
5.5.6 Technical Data for Tiger 25
5.5.7 Dimensions and Connections for Tiger 26